Showing posts with label sony. Show all posts
Showing posts with label sony. Show all posts

Sunday, 11 August 2019

Calling all Sony BVM 14F1 & 20F1 owners: Your CRT could be at risk of software death


The three chips pictured below found in the BC slot1 board contain key software at risk of preservation unless we act today.


IC3 is a 2mbit flash and contains the cpu code, according to the manufacturer datasheet it has a data retention guarantee of 10 years. IC107/108 are 256kbit eproms containing key system signals, their data inside will last 30-40 years depending on conditions.

If you would like to help preserve these please dump/read these chips and provide me a copy along with your CRT monitor model and year, BC board revision code, and software revision (menu->status). If you don't have a chip reader you can buy the inexpensive TL866II Plus from Ebay, IC3 will dump as AM28F020, and IC107/108 as any 27C256 eprom variant.

My monitor is a 20F1E from 2002, BC board rev A-1135-825-B, software rev 1.40. I have uploaded a copy of the content of my chips here: https://drive.google.com/drive/folders/1RcOjDqqe6G82cl521OmtAqBghIEh3i2x

UPDATE 8/13: Now moved to Github: https://github.com/ArcadeHacker/Dumps/tree/main/Monitors

Thanks for collaborating in preserving such fantastic monitors.


Sunday, 4 March 2018

Is Your Gaming CRT Exposing You to X-Rays?

Motivated by this discussion at UKVAC I decided to run a little experiment to find out if your typical gaming CRT leaks any measurable X-rays. Tan while having fun? Let's find out.

Test Setup 

My setup involved testing three tubes in my collection used from time to time for testing arcade pcbs, retro consoles, as well as micro computers. I believe these models are also commonly found among the gaming community and they should be somehow representative.

In front of each tube an X-ray sensor is placed at different distances: 3cm, 30cm, 60cm. X-ray activity is sampled during 180 seconds during each run, then compared against ambient readings (tube turned off).

Initially the X-ray sensor is left to warm up for a good 10 minutes to obtain constant ambient reads.

NEC XM29

Sony BVM-20F1E

Toshiba A68 CRT (NANAO MS9) on a New Astro City cab

The Results

I'm afraid to break the news but... there's no such thing as a free tan while retro gaming. At no time any of the tubes tested presented any abnormal sensor reads indicating the presence of X-rays. To put things into perspective I have included a table below comparing the different scenarios together with reads of the sensor exposed to radiation from a controlled x-ray source.


I'm no expert on this matter, but even if the energies inside the tube are high enough to produce X-rays, the glass in your CRT has lead in it to block those from reaching you. Perhaps someone with enough expertise could confirm these assumptions.

Happy safe gaming.